Assembled in France
Parallel cables 1 meter – AP SYSTEMS battery 5.12kWh 51.2V – Amphenol connectors
Compatible with: APbattery 5.12kWh – 51.2V – 100Ah battery (APsystems). Parallel connection up to 32 units (163.84 kWh max). Compatible with APstorage ELS-5K (single-phase) and ELT-12K (three-phase) systems. Battery communication via CAN, RS485, Wi-Fi. IP65 certification – indoor and outdoor installation.
Main features :
- Length: 1 meter
- Cross-section: 25 mm²
- Connectors: Amphenol SURLOK
- Current supported: 60A rated (100Ah / 0.6C)
- High-conductivity tinned copper
- Insulation: resistant up to 105°C
- Assembly: Manual, in France 🇫🇷
- Crimping: Certified hydraulic
- Contact resistance: < 0.5mΩ
24-48h
French customer service
Card, PayPal, transfer
Experts available
Key points
- Authentic Amphenol connectors
- 25mm² cable section for maximum conductivity
- Compatible with Pylontech, BYD and Goodwe batteries
- Compliant with European safety standards
Quick installation guide
Frequently asked questions
- Compatible with which AP SYSTEMS battery? APbattery 5.12kWh – 51.2V / 100Ah
- How many batteries can be connected in parallel? Up to 32 units (163.84 kWh max)
- Battery rated current? 60A (0.6C over 100Ah) – 25mm² cross-section is more than sufficient
- Compatible with ELS-5K and ELT-12K? Yes, the cables provide the power link between batteries; communication runs via the CAN port
- Is the assembly really French? Yes, hydraulic crimping done in our workshops 🇫🇷
- Delivered ready to use? Yes, pre-assembled and tested connectors
1-meter parallel connection cable specifically assembled to interconnect AP SYSTEMS APbattery 5.12kWh (51.2V / 100Ah) batteries in a parallel configuration. The APbattery 5.12kWh supports up to 32 units in parallel to reach a total capacity of 163.84 kWh. Our cables, assembled in France 🇫🇷, guarantee a reliable and secure connection between your modules.
Designed for the APstorage ecosystem:
APsystems' APbattery 5.12kWh uses a high-performance LiFePO4 chemistry with 6000 life cycles and a 94% round-trip efficiency. These 25mm² cables are sized to support the battery's 60A rated current and current peaks, while maintaining minimal contact resistance.
Kit contents:
- 1 positive (red) cable, 25mm² – 1 meter with Amphenol SURLOK connector
- 1 negative (black) cable, 25mm² – 1 meter with Amphenol SURLOK connector
- Pre-assembled and tested connectors – ready to plug in
Certified French assembly:
- Hydraulic crimping performed with certified tooling 🇫🇷
- Contact resistance < 0.5mΩ
- High-conductivity tinned copper
- Insulation resistant up to 105°C
Recommended uses
Parallel connection of APbattery 5.12kWh batteries to increase storage capacity. Residential and commercial solar installations under APsystems DS3 micro-inverter architecture. Backup systems with APstorage ELS-5K or ELT-12K. Progressive capacity extension by adding modules.
Did you know?
Similar products
Everything you need to know about parallel cables 1 meter – ap systems battery 5.12kwh 51.2v – amphenol connectors
Why choose high quality cables?
Parallel cables for batteries require optimal conductivity to ensure the efficiency of your energy storage system.
French assembly - A guarantee of quality
All our cables are assembled in France by qualified technicians. Each connection is carefully crimped to current standards, and every product undergoes rigorous quality control before shipping. This means you get a reliable, durable solution for your installation.
Recommended applications
These cables are perfectly suited for:
- Residential solar installations with energy storage
- Off-grid systems requiring reliable batteries
- Hybrid setups combining grid power and autonomy
- Expansions of existing storage capacity
Guaranteed compatibility
Our cables are compatible with all Pylontech lithium batteries (US2000, US3000, US5000), as well as equivalent BYD and Goodwe systems. Amphenol connectors ensure a perfect, secure connection.
Availability notification
Receive an email as soon as this product is available again.