Pylon-Monitor V2 – Real-Time Pylontech Battery Monitoring
Compatible with low-voltage Pylontech batteries fitted with an RS-232 Console port: US5000, US3000C, US3000, US2000C, US2000B+, UP2500 and the Force-L1 family. Up to 16 chained batteries, mixed models included, monitored individually from a single device plugged into the master battery — every cell included.
Since firmware 2.8 it also reads high-voltage Pylontech packs (Force H2 towers, H48050 / H48074 modules behind an SC0500 controller), detected automatically. The controller reports no state of health or cycle count, and this support has not yet been confirmed on a customer's high-voltage pack.
Main features :
- Connection: Pylontech Console RJ45 (RS-232) port
- Built-in screen: 1.8″ TFT IPS (SOC, voltage, current, SOH, cycles)
- Power: USB (cable included)
- Web dashboard + JSON API (/api.json)
- Home Assistant ready (MQTT auto-discovery), Jeedom, Node-RED, Domoticz
- Remote diagnostics: per-cell voltage and temperature, SOC/SOH history, charge cycles
- Lifetime remote firmware updates (OTA)
- Device weight: 93g · Shipped parcel weight: 123g
- 100% local, no cloud, no subscription
24-48h
French customer service
Card, PayPal, transfer
Experts available
Key points
- Authentic Amphenol connectors
- 25mm² cable section for maximum conductivity
- Compatible with Pylontech, BYD and Goodwe batteries
- Compliant with European safety standards
Quick installation guide
- Plug the included RJ45 cable between the Pylon-Monitor and the battery's Console port, then power it with a USB cable.
- Join the
PylonMonitor-SetupWiFi network from your phone, then select your own WiFi network. - Open the IP address shown on the TFT screen in your browser: your battery's live dashboard appears instantly.
Frequently asked questions
- Does it work without internet? Yes, the device is 100% local on your WiFi network.
- Does it void my Pylontech warranty? No, the Console port is read-only and never changes battery behaviour.
- Compatible with multiple chained batteries? Yes, up to 16 batteries (every cell included) from a single device.
- Do I need an app or account? No, the dashboard works from any browser on your local network.
The Pylon-Monitor V2 is a standalone device that reads State of Charge, voltage, current, cell health (SOH) and temperatures from your Pylontech battery in real time, straight from the Console (RJ45) port. All data is exposed through a clean JSON API and a web dashboard reachable over WiFi from any phone, tablet or PC — no USB cable permanently tethered to a computer.
Truly plug & play: under 2 minutes from unboxing to a live dashboard, no app, no account, no cloud.
Recommended uses
Ideal for remote monitoring and diagnostics of a Pylontech battery installed in a basement, garage or plant room — check state of charge, voltage, cells and temperatures over WiFi without running a USB cable to a PC. A local, subscription-free alternative to wireless battery diagnostic adapters, for solar installers and off-grid enthusiasts alike.
Similar products
Availability notification
Receive an email as soon as this product is available again.